Using WellSchema

Create a well or import an EDM XML Export

Every schematic belongs to a well, so a well comes first. Type its header yourself, or pre-fill it from an EDM XML Export read on your own computer.

By WellSchema Engineering ·

Open Wells in the sidebar and choose New well. The dialog offers two ways in: Enter manually and Import from EDM XML Export.

Enter the well yourself

  1. Choose Enter manually.
  2. Under Identity, type the Well Name, which is required and must be new in this workspace. Field and Operator are optional.
  3. Under Surface location, type the Latitude and Longitude. Both are required. Country, State and County fill in from them, and you can change what they say.
  4. Check the Units. They apply to every schematic under this well, and they lock once the first schematic is created.
  5. Under Elevation reference, add RKB Above GL, GL Above MSL and Water Depth if you have them. They are optional.
  6. Choose Create well. The well’s page opens.

Add its first schematic

  1. On the well’s page, choose New schematic.
  2. Choose Create from scratch, which starts from a default set of casing strings and a Tubing string you then change, or Create from library, which starts from one of your templates.
  3. Name it and choose Create schematic. Next, follow Add casing, tubing, packers and perforations.

Import from an EDM XML Export

This creates the well and its first schematic together. A rail down the side of the page shows every step, and a step that doesn’t apply to your export is passed over and says why.

  1. Choose Import from EDM XML Export.
  2. Drop the .xml file on Upload your EDM XML Export, or click to browse. It can be up to 500 MB, and it is read in your browser.
  3. Pick the EDM Well, then its EDM Wellbore if it has more than one, then the EDM Design to take, and choose Continue. If no EDM Design can seed a schematic, Continue without a schematic creates the well alone.
  4. Check Well details, pre-filled from the export, and choose Continue.
  5. Under Data, tick what to import: Survey/Plan, Casing Program, Tubing and Formation Tops. A row the EDM Design holds nothing for is greyed and says why. Choose Continue.
  6. Each thing you ticked gets its own step. Check it and choose Import or Skip.
  7. On Review, check the whole import. Edit takes you back to a step. Choose Create well, and the new schematic opens in the editor. Nothing is saved before this.

What leaves your computer on an import

The file itself is never uploaded. Three things do reach WellSchema:

  • The Surface Hole Location. Its latitude and longitude, so the form can name the place. Our server may send them to OpenCage to look it up, as it does for a latitude and longitude you type.
  • The well you create, with a stamp on its schematic naming the file and the EDM Well, EDM Wellbore and EDM Design it came from.
  • The file’s layout, unless you untick its box. The box beside the line describing the export reads Share this file’s layout and starts ticked for every file. It sends the EDM version and the table and column names with how many rows carry each, and no values.
Which plans. Both ways work on every plan. The Free plan holds one well and one schematic, so a second well is refused with Free plan limit reached — upgrade for unlimited wells. A Team workspace on the Free plan is read-only and can’t create one. See Plans, Trial and Full Access.